Standard infrared bandpass filters

Standard infrared bandpass filters

From Andover

Bandpass filters isolate specific regions of the spectrum, simultaneously providing high transmission of desired energy, and deep rejection of unwanted energy. Available in wide or narrow bandwidths, they can be tailored to suit your specific requirements.

Constructed of hard, durable first-surface dielectric coatings on optical-quality IR-transmitting substrates, these filters will withstand normal cleaning and handling associated with any high-quality optical component.

Eigenschaften
  • Useful for isolating narrow spectral regions
  • Constructed of hard, durable first-surface coatings
  • Available in standard and custom wavelengths up to 14µm
  • Filters offered in 25mm dia, but custom sizes, shapes and optical characteristics available

Spezifikation

General Specifications
Diameter Tolerance+0/-0.1 mm
Min. Clear Aperture21 mm Dia.
Transmission (Typ.)60-80%
BlockingT < 0.1% Average to 30 µm
24-hour Humidityper MIL-C-48497A
Moderate Abrasionper MIL-C-48497A
Adhesionper MIL-C-48497A
OptionalMounted in threaded ring - contact our expert on the right for thread sizes

 Standard IR gas analysis bandpass filters

GasCenter W/LBandwidthPart Number
Water Vapor2.70 ± 0.03 µm
2.95± 0.03 µm
120 ± 30 nm
130 ±30 nm
2.70GA05-25
2.95GA05-25
Methane and Ethanol3.46 ± 0.04 µm140 ±30 nm3.46GA05-25
Formaldehyde3.60 ± 0.04 µm140 ± 30 nm3.60GA05-25
CO24.26 ± 0.04 µm120 ±30 nm4.26GA05-25
CO4.67 ± 0.05 µm150 ±30 nm4.70GA05-25
NO5.30 ± 0.05 µm420 ± 50 nm5.30GA05-25
SWIR4.00 ± 0.20 µm2000 ±200 nm4.00GA20-25
FIR Broadband10.0 ± 0.20 µm4000 ±200 nm10.00GA40-25
CO210.6 ± 0.10 µm420 ±100 nm10.60GA15-25

Custom IR Bandpass Filters

 Andover can design and fabricate custom bandpass filters to suit your particular requirements. Every phase of the process is performed in-house, including thin-film coating design, mechanical design, substrate fabrication and polishing, coating, inspection and environmental testing.

We can coat a variety of substrate materials, including Germanium, Sapphire, Silicon, Calcium Fluoride, Zinc, Sulfide and Zinc Selenide. Contact our expert on the right for a quotation, whether it is for prototype quantities or production quantities.

Custom IR Bandpass Filter Specifications

Custom spectral and physical properties available upon request

Bandwidth
(% of CW/L)
W/L RangeTransmission
(Typ.)
BlockingPart Numbers
>10%2.4 µm - 5.0 µm
5.1 µm - 6.5 µm
6.6 µm - 8.5 µm
8.6 µm - 10.3 µm
10.4 µm - 14.0 µm
70-80%
70-80%
60-70%
60-70%
50-60%
0.3 to 40 µm
0.3 to 15 µm
0.3 to 15 µm
0.3 to 15 µm
0.3 to 15 µm
IRFC10-25
IRFC12-25
IRFC14-25
IRFC16-25
IRFC18-25
1.5-10%2.4 µm - 5.0 µm
5.1 µm - 6.5 µm
6.6 µm - 8.5 µm
8.6 µm - 10.3 µm
10.4 µm - 14.0 µm

70-80%
70-80%
60-70%
60-70%
50-60%

0.3 to 40 µm
0.3 to 15 µm
0.3 to 15 µm
0.3 to 15 µm
0.3 to 15 µm
IRFC20-25
IRFC22-25
IRFC24-25
IRFC26-25
IRFC28-25

Anwendungen

Environmental monitoring
Security systems
FLIR systems
Avionics

Kontakt

Jörg Tobisch
Jörg Tobisch

Kontakt

Quantum Design GmbH

Im Tiefen See 58
64293 Darmstadt
Germany

Telefon:+49 6151 8806-0
Fax:+49 6151 8806920
E-Mail:germany@qd-europe.com
Cookie Hinweis Cookies helfen uns bei der Bereitstellung unserer Dienste. Wenn Sie unsere Dienste nutzen, stimmen Sie der Verwendung von Cookies zu. Datenschutzhinweise
Jörg TobischProduct Manager - Optics
+49 6151 8806-50
tobisch@qd-europe.com