Our partnerLake Shore Cryotronics

Cryogenic Accessories

From Lake Shore Cryotronics

To contact heaters and sensors in a low temperature environment, it is important to use special materials suitable for these temperatures. Good electrical conductivity paired with poor thermal conductivity materials are here the materials of choice, like phosphor-bronze. Also, other cryogenic and temperature measurement accessories could be found here, including cable, wire, solder, heaters, insulating and conductive materials.

Features
  • Cryogenic wires and cables
  • Solder for cryogenic application
  • Epoxy, grease and varnish for low temperatures
  • Superinsulation, vacuum feedthroughs, cartridge heaters

Further information

Cryogenic wires

  • Single strand cryogenic wire — WSL-32, WSL-36
  • Twisted lead wire — WCT-34
  • Duo-Twist™ cryogenic wire — WDT-32, WDT-36
  • Quad-Lead™ cryogenic wire — WQL-32, WQL-36
  • Quad-Twist™ cryogenic wire — WQT-32, WQT-36
  • Manganin wire — WMW-30 , WMW-32, WMW-36
  • Heavy duty lead wire — WHD-30
  • Nichrome heater wire — WNC-32

Cryogenic cables

  • Ultra miniature coaxial cable — type C, SC, SS
  • Semi-rigid coaxial cable — type SR
  • CryoCable™ — type CRYC

Solder

  • Indium foil/solder
  • High temperature solder
  • Ostalloy® 158 solder

Epoxy

  • Low temperature conductive epoxy
  • Stycast® Epoxy 2850-FT, Catalyst 9

Grease

  • Apiezon® Grease—types N and H

Varnish

  • VGE-7031

Cryogenic accessories

  • Heat sink bobbins
  • Beryllium oxide heat sink chip
  • Superinsulation
  • 19-pin vacuum feedthrough
  • 4-lead resistance sample holder
  • Cartridge heaters
  • Electric tape for use at cryogenic temperatures
  • Ferrite bead for high frequency filtering

Specification

Downloads

Wire
Wire
Coaxial cable
Coaxial cable
Solder
Solder
Epoxy, grease, and varnish
Epoxy, grease, and varnish
Miscellaneous accessories
Miscellaneous accessories

Contact

Dr. Tobias Adler
Dr. Tobias Adler
David Appel
David Appel
Dr. Marc Kunzmann
Dr. Marc Kunzmann

Contact

Quantum Design GmbH

Im Tiefen See 58
64293 Darmstadt
Germany

Phone:+49 6151 8806-0
Fax:+49 6151 8806920
E-mail:germany@qd-europe.com
Tobias AdlerProduct Manager - Cryogenics & Materials science
+49 6151 8806-479
adler@qd-europe.com

David AppelProduct Manager - Cryogenics & Materials science
+49 6151 8806-499
appel@qd-europe.com

Marc KunzmannProduct Manager - Cryogenics & Materials science
+49 6151 8806-46
kunzmann@qd-europe.com