Notre partenaire Quantum Design

Un purificateur de gaz à l'hélium de technologie avancée

ATP30 de Quantum Design

Les purificateurs de gaz à l'hélium sont utilisés pour éliminer les impuretés, telles que les composants de l'air (oxygène, azote, eau, ....) mais aussi d'autres contaminants, tels que les huiles et les hydrocarbures, du gaz hélium. Dans ce processus, l'hélium gazeux, y compris les impuretés, est refroidi à des températures cryogéniques et tous les composants du mélange gazeux, à l'exception de l'hélium, sont ainsi congelés. La puissance de refroidissement est fournie soit par l'azote liquide (piège à froid LN2), soit par un cryo-refroidisseur (Advance Technology Purifier, en abrégé ATP), selon le purificateur.

Caractéristiques
  • Entièrement automatique
  • Fonctionnement de sécurité intégrée
  • Procédure de régénération automatisée

Plus d'informations

The ATP30 uses a Gifford-McMahon (GM) cryo-cooler to freeze out impurities like nitrogen and oxygen in the helium gas. The GM cryo-cooler has a closed helium gas loop that is pressurized by a compressor. The compressed helium gas is then expanded in the cold head of the purifier which generates low temperatures that cool down the dewar and the helium gas inside.

The helium purifier has no sophisticated installation requirements and can easily be operated in any laboratory. A touch-screen panel allows easy control of the automated system.

The ATP30 is part of the high pressure recovery system, which catches helium boil off in a gas bag and stores it in gas cylinders, which are pressurized by a high pressure helium gas compressor. In the high pressure recovery impurities like oxygen and nitrogen diffuse through the plastic gas bag and into the helium gas. These impurities are separated from the helium gas by the ATP30, so the clean helium gas can be liquefied again.

Specification

Purification rate: 30 liters of gas per minute

Purity: 99.9995% (better than UHP)

Fail safe operation

Regeneration time: 5 hours (fully automatic)

System Dimensions (L x W x H): 60 x 65 x 120 cm

Compressor Package Model: Air or water-cooled

Typical Power Consumption and Voltage Range: 5 kW; High & Low Voltage Available

Fully Automated Touch Panel Control

Applications

As the ATP30 is used to supply the ATLs with clean helium gas, it is used everywhere where the ATLs are used, for example for the recovery of liquid helium in magnetism and cryotechnology with Quantum Design products like the MPMS and PPMS, with Magnetoencephalography (MEG) systems by Elekta and with Nuclear Magnetic Resonance (NMR) systems by various suppliers. Other equipment that runs with the liquid helium from our ATLs are bath and flow cryostats of any kind for measurement methods like Atomic Force Microscopy (AFM), Scanning Tunneling Microscopy (STM), Fourier Transform Mass Spectroscopy (FT-MS) , Electron Paramagnetic Resonance Spectroscopy (EPR), Cathodoluminescence, Mossbauer Spectroscopy, IR Detectors und Electron Beam Ion Traps (EBIT).

As soon as the helium gas gets contaminated due to recovery lines not made from metal the ATP30 should be used to clean your helium gas before feeding it into the ATLs.

Téléchargements

ATL next generation
Purification cartridges
Application Note High pressure recovery plant

Contact

Nicolas Tcherbak
Nicolas Tcherbak

Contact

Quantum Design S.A.R.L.

1 avenue de l’Atlantique
Bâtiment Mac Kinley
91940 Les Ulis
France

Tél. :01 69 19 49 49
Fax :01 69 19 49 30
Email :france@qd-europe.com
Nicolas TcherbakDirecteur Commercial
01 69 19 49 49
tcherbak@qd-europe.com