Quorum Technologies Quorum Technologies

Critical-point dryer

Critical point dryer K850 combines versatility and ease of operation. Built-in thermo-electric heating and adiabatic cooling allow precise temperature control. The vertical pressure chamber (32 mm in ...


Cryo preparation system for scanning electron microscopy

The cryo preparation system allows the analysis of wet samples with scanning electron microscopy (SEM) at temperatures down to -190 °C. During cryo preparation, samples are frozen rapidly and fed ...


Carbon and Sputter Coaters – rotary pumped

The RotaQ series are fully automated, modular coating systems for the deposition of electrically conductive carbon or noble metal films recommended for electron microscopic applications at low and ...


High-Vacuum Carbon and Sputter Coaters – meeting higher demands

The TurboQ Plus series are fully automated, modular coating systems for the deposition of electrically conductive carbon or metal films recommended for electron microscopic applications at low and ...


Airlock

The PP3004 airlock QuickLok has been designed for rapid sample launching at room temperature in an SEM, FIB/SEM etc. and for sample transport under vacuum or inert gas. The lock needs a free flange ...


Coldstage

SEMCool PP3005 is a combination of a cooling table/sample holder and a separately controllable cooling trap. This system creates a sample cooling down to -190 °C (± 0.5 °C). At normal operating ...


Airlock with coldstage

CoolLok PP3006 is a combination of a sample port and cold stage/cold trap. The system offers fast specimen launch into an REM and sample cooling down to -190 °C (± 0.5 °C). At normal operating ...


Sputter & carbon coater for glove box - high vacuum

The Q150GB is a modular glovebox version of the highly successful Q150T ES bench top turbomolecular-pumped coating system. It is suitable for SEM, TEM and many thin-film applications. The system is a ...


Entry-Level Sputter Coater

The MiniQS sputter coater is ideal for benchtop/tabletop SEM users looking for a robust and simple sputter coater. The MiniQS combines a compact and robust design with ease of use, providing users ...


Carbon and Sputter Coaters – meeting higher demands

As of February 2025 this product has been discontinued. Quorum will provide parts and service for the following 7 years. The Q150-series has been replaced by the QCoat series. For further information ...


Sputter Coater with large sample chamber

The Q300T Plus series are fully automated, modular coating systems with large vacuum chambers for applying fine-grained films for SEM, TEM and thin-film technology. The Q300T Plus can be acquired as a ...


Carbon and Sputter Coaters – rotary pumped

As of February 2025 this product has been discontinued. Quorum will provide parts and service for the following 7 years. The Q150-series has been replaced by the QCoat series. For further information ...


Carbon and Sputter Coaters – high vacuum

As of February 2025 this product has been discontinued. Quorum will provide parts and service for the following 7 years. The Q150-series has been replaced by the QCoat series. For further information ...


GloQube Plus Glow discharge system

The GloQube Plus is a compact, easy to use, stand-alone glow discharge system. The primary application of the system is the hydrophilisation (wetting) of carbon-coated TEM support films and grids. ...

Contact

Quantum Design AG

Route du Roule 41
CH-1723 Marly
Switzerland

Phone:+41 21 8699-033
E-Mail:suisse@qd-europe.com
Dr. Jürgen SchlütterManaging Director
+49 6157 80710-496
Write e-mail