Agile Temperature Stage –
No drift from 4 K to 350 K

Does your low temperature application require precise positioning and thermal stability? The Agile Temperature Stage from Montana Instruments was developed to suit your needs. A temperature change during optical measurements with high numerical aperture (NA) often leads to a loss of focus due to drift or a shift of the interesting structures on the sample into areas outside the imaging area.

The Agile Temperature Stage is an integrated device that combines a variety of technologies in one system.

A unique suspension design optimizes the mechanical stability and stiffness and provides the thermal performance necessary for rapid temperature changes. The suspended structure reduces thermal contraction to < 30 µm over the entire temperature range from 4 to 350 K.

This eliminates the need to re-focus after small temperature changes and guarantees stability of the optimized focus even throughout longer measurement times.

See a live demonstration of the Agile Temperature Stage under:
http://www.montanainstruments.com/videos/49/Agile-Temperature-Stage-Overview.html

Specifications
Temperature rangeBasis – 350 K
Temperature stability< 50 mK (P – P)
over 15 minutes
ThermometerCernox CX-1050-HAT
Drift over the complete T-range< 30 µm *
Resonance frequency @ 292 K> 5 kHz
Typical heating and cooling rate300 K/5 min
Temperature gradient0.2 K above basis
Control ports2 heaters and
4 thermometers

* measured in the center and in the corner
   of a 3 x 3 mm calibration grating

Contact

Dr. Simone Paziani
Dr. Simone Paziani

Register

Newsletter registration

Contact

Quantum Design s.r.l.

Italy and Israel branch office
Via Francesco Sapori, 27
00143 Roma
Italy

Phone:+39 06 5004204
Fax:+39 06 5010389
E-mail:italy@qd-europe.com
Dr. Simone PazianiSales Director
+39 06 5004204
Write e-mail