High performance fluorometer
Fluoro300 from BenthamThe Fluoro300 is a highly configurable fluorometer utilised in the high-accuracy assessment of solid and liquid samples.
Comprising a monochromatic excitation source sample chamber and emission analysis monochromator, excitation and emission spectra can be generated. Measurements can be either relative or using an integrating sphere, quantum yield results can be obtained.
- Monochromatic excitation source (250-1100nm)
- Easy to use
- Accurate and repeatable measurement procedure
Further information
Core benefits
- Highly configurable
- Easy to use
- Accurate and repeatable measurement procedure
Specifications
Excitation monochromator
| UV source | 75W short-arc xenon lamp |
| Spectral range of operation | 250-1100nm |
| Monochromator configuration | Symmetric, single Czerny-Turner |
| Monochromator focal length | 300mm |
| Diffraction gratings | 2400 g/mm |
| Dispersion | 5.4nm/mm (2400g/mm) |
| Wavelength accuracy | ± 0.1nm (2400g/mm) |
| Beam diameter at sample plan | 4mm diameter |
Emission monochromator
| Spectral range of operation | 250-1100nm |
| Bandwidth | 1nm |
| Wavelength accuracy | ± 0.1nm (2400g/mm) |
| Detectors | Thermoelectrically cooled photomultiplier detector (200-800nm), Silicon photodiode (800-1100nm) |
| Signal recovery | Dual channel picoammeter |
Computer requirements
| OS | Windows 7, Windows 8 (32-/64-bit) operating systems (or newer) |
| Software control | BenWin+ Spectral acquisition software |
| Minimum hard disk space | Approx. 100MB |
| Minimum RAM | 2 GB |
| Interface | 3 x USB 2.0 ports |
Contact
Navigation
Categories
Contact
Quantum Design GmbH
Roddarestigen 3
SE 182 35 Danderyd
Sweden
| Phone: | +46 8 41071791 |
| E-mail: | nordicqd-europe.com |
