Our partner

High-speed cameras for aviation applications

from AOS Technologies

These compact, high-speed cameras with built-in memory are designed for applications where suitability for varying and exceptional outdoor temperatures and small footprint is important. These high-speed cameras are not only suitable for use with high acceleration forces and vibrations, but also comply with MIL 810 / MIL 461 standards. Some of the cameras can be adapted to specific space requirements by modifying the housing ex works. The equipment with battery, low power consumption and solid interfaces is designed for high flexibility even for longer applications. The cameras are equipped with memory units, partly also with CFast cards.

Further information

Product overview high-speed cameras for military applications

Name	res @ fps	Memory	Size (WHL mm)	Options and Features
L-EM	1920 x 1080 @ 2500	4 GB to 10,4 GB	75 x 75 x 130	CFast flash card interface MIL connectors opt. In compliance with MIL-STD-810 In compliance with MIL-STD-461E
M-EM	1280 x 864 @ 3700 1280 x 800 @ 4000	4 GB to 16 GB	75 x 75 x 130	HD-SDI video out CFast flash card interface MIL connectors opt. In compliance with MIL-STD-810 In compliance with MIL-STD-461E
N-EM	1920 x 1400 @ 800 1920 x 1080 @ 1000	8 GB to 16 GB	75 x 75 x 125	HD-SDI video out CFast flash card interface Rescue Flash built-in 1” lens compatible In compliance with MIL-STD-810 In compliance with MIL-STD-461E
Q-MIZE EM	1696 x 1710 @ 500 800 x 600 @ 2800	1.3 GB to 10,4 GB	74 x 71 x 80	Video Out opt. Flash Card Interface opt. MIL Connectors In compliance with MIL-STD-810 In compliance with MIL-STD-461E
S-MIZE EM	1280 x 1024 @ 500 800 x 600 @ 1250	1.3 GB to 10.4 GB	74 x 71 x 80	Video Out opt. Flash Card Interface opt. 90° Camera view Flathead for tube integration MIL Connectors In compliance with MIL-STD-810 In compliance with MIL-STD-461E
Q-EM	1696 x 1710 @ 500 800 x 600 @ 2800	2.6 GB to 10.4 GB	72 x 72 x 137	Video Out opt. Flash Card Interface opt. MIL Connectors Extended Battery pack (2 hours capacity) In compliance with MIL-STD-810 In compliance with MIL-STD-461E
S-EM	1280 x 1024 @ 500 800 x 600 @ 1250	1.3 GB to 10.4 GB	72 x 72 x 137	Video Out opt. Flash Card Interface opt. MIL Connectors Extended Battery pack (2 hours capacity) In compliance with MIL-STD-810 In compliance with MIL-STD-461E
H-EM 501 MIL Streaming Camera	2048 x 1088 @ 85 800 x 600 @ 300	Up to 1 TB	55 x 54 x 65	Streaming camera Small form factor Single connector In compliance with MIL-STD-810 In compliance with MIL-STD-461E
ASTREC-4 MIL-Certified Streaming Controller	2048 x 1088 @ 85 800 x 600 @ 300	up to 512 GB per camera head	304 x 234 x 84	Long time streaming controller UPS Backup 10 minutes HD-SDI output
X-TREME	1280 x 1024 @ 500 1280 x64 @ 8000	1.3 GB to 10.4 GB	85 x 85 x 200	Video Out Flash Card Interface Battery Water tight housing Customization In compliance with MIL 810 / DO 160

L-EM

L-EM is a compact and rugged highspeed camera with a high-sensitivity, full HD sensor. Thanks to the implemented image reconstruction algorithm, L-EM offers an outstanding imaging quality. The camera reaches 2500 Hz at full frame with even higher rates in windowing mode. The L-EM is tested in accordance with MIL-STD 810 and MIL-STD 461 and configured with HD-SDI and CFast card interface. A chillbox is available for applications in confined spaces at high temperatures. Comprehensive Imaging Studio software is included in the delivery. The hardware can be customized to fit various environments.

M-EM

Compact, rugged, highly light-sensitive with outstanding frame rate. These are the features of the M-EM high speed camera. The M-EM offers up to 4000 fps at full frame with a megapixel sensor that boasts up to ISO 10000 light sensitivity. Packed in a rugged housing, this highspeed camera is ideally suited for sophisticated applications in tough environments. The M-EM is tested in compliance with MIL-STD 810 and MIL-STD 461. The camera comes with HD-SDI and internal memory as well as a CFast card interface. An optional chillbox is available for cooling.

N-EM

The N-EM is particularly well suited for all applications where a compact, portable, high-resolution camera may be used under the toughest environmental conditions. The highly light-sensitive sensor provides Full HD 1920 x 1080 pixels, with framing speeds of up to 1000 fps. These features are embedded in a compact and rugged design that suits even the most ambitious application. The N-EM is designed and officially tested in accordance with MIL 810 and MIL 461 standards. Offering a wide range of signals for external control and feedback on camera status during operation, the N-EM is a genuine all-in-one camera. Fast download of your image sequence is achieved via Gigabit Ethernet or CFast removable cards. The N-EM also supports IRIG-B input for synchronization and time stamping as well as an HD-SDI video output.

Q-MIZE EM

The Q-MIZE EM is a very compact high speed camera. It complies with the standards MIL 810 / MIL 461. The camera can be flexibly expanded to meet the requirements. The built-in battery and up to 10GB memory provide a long-lasting stand-alone operation. The Q-MIZE EM uses a 3 MegaPixel detector at 500 frames per second full screen and with frame rates of up to 100000 fps in windowing mode. Of course, the Q-MIZE is also designed for shocks at 100G with peaks up to 200G. The Q-MIZE EM can be operated at outside temperatures of -50 ... + 55 °C can be operated. The camera is available in two versions. You choose whether the connections are on the front or on the side and thus determine the space requirement in your application. If necessary, the housing can be adapted for your application.

S-MIZE EM

The particularly small S-MIZE EM camera impresses with an outstanding image thanks to the 1.3 MPixel detector. In full screen mode this camera runs at 500 fps. The built-in battery and different memory sizes ensure long-term use without a PC. The S-MIZE EM complies with the MIL 810 / MIL 461 standards. Thanks to its small size, the camera is frequently used in airborne applications. The S-MIZE EM can be used at outside temperatures of -50 ... + 55 °C can be operated. The camera is available in two versions. You choose whether the connections are on the front or on the side and thus determine the space requirement in your application. It is possible to customize the housing ex works for your application.

Q-EM

The Q-EM is a compact high speed camera for applications where difficult environmental conditions prevail. It complies with the standards MIL 810 / MIL 461. A CF interface for storing the sequence data is built into the camera. The 3 megapixel detector provides a high spatial resolution at 500 frames/second. Even in a 900*700 pixel window, frame rates of 2000 fps can be achieved. Optionally, the camera can be equipped with a video output and a battery for 2 hours operating time.

S-EM

The S-EM is small, light and expandable. 1250 frames per second are achieved with a powerful 1280 x 1024 pixel detector. The S-EM is built according to the standards MIL 810 / MIL 461. The camera can be used in ambient temperatures from -51°C to +49 ºC. The S-EM can be supplied with different housings, e.g. a special airborne housing. Optionally, the camera can be used with a video output or a battery for 2 hours operating time.

H-EM System

This system consisting of up to four high speed streaming cameras connected to an airborne controller, able to stream image sequences to flash disks for hours. H-EM is designed for airborne applications features an ultra-solid design and a structure to withstand the harsh environmental conditions of flight. This system can meet the big challenge of immunity to shock, vibration, changes of temperature and moisture. H-EM is a solution for long time high speed recordings for aircraft and component testing.

X-TREME

This fully enclosed high speed camera system is especially equipped with functionality used in UCAV (unmanned combat aerial vehicle), airborne store separation tests and defense testing application where heat, water and shock and vibration are present. The MIL 810 / DO 160 tested camera was developed for application where e.g. on-line image data transfer in normal video speed via an on board telemetry system to ground station is imminent while the camera records events in high speed and stores it inside the camera.