MicroWriter laser lithography system

MicroWriter is a flexible photolithography machine designed for rapid prototyping and small-volume manufacturing in R&D laboratories and small clean rooms. Conventional approaches to photolithography are usually based on exposing through a chromium-glass mask manufactured by specialist vendors. The fact that all of the wafer is exposed in parallel makes this technique fast. The alternative conventional approach is to use direct-write laser lithography, where a computer-controlled laser writes directly to the wafer. The optics required to make a direct-write machine expose quickly are extremely complicated and result either in the machine being very expensive (~€1M) or very slow (~18 hours exposure time for a single wafer).
The low-cost MicroWriter combines the flexibility of maskless direct writing with the speed of parallel exposure.

More about the laser lithography system MicroWriter

Contact

Julien Dumouchel
Julien Dumouchel

Register

Newsletter registration

Contact

Quantum Design AG

Route du Roule 41
CH-1723 Marly
Switzerland

Phone:+41 21 8699-033
E-Mail:suisse@qd-europe.com
Julien DumouchelSales Manager
+41 21 8699033
dumouchel@qd-europe.com