MicroWriter laser lithography system

MicroWriter is a flexible photolithography machine designed for rapid prototyping and small-volume manufacturing in R&D laboratories and small clean rooms. Conventional approaches to photolithography are usually based on exposing through a chromium-glass mask manufactured by specialist vendors. The fact that all of the wafer is exposed in parallel makes this technique fast. The alternative conventional approach is to use direct-write laser lithography, where a computer-controlled laser writes directly to the wafer. The optics required to make a direct-write machine expose quickly are extremely complicated and result either in the machine being very expensive (~€1M) or very slow (~18 hours exposure time for a single wafer).
The low-cost MicroWriter combines the flexibility of maskless direct writing with the speed of parallel exposure.

More about the laser lithography system MicroWriter

Contact

Nicolas Tcherbak
Nicolas Tcherbak

Register

Newsletter registration

Contact

Quantum Design S.A.R.L.

Avenue de l’Atlantique
Bâtiment Fuji Yama
91940 Les Ulis
France

Phone:+33 1 69 19 49 49
E-mail:franceqd-europe.com
Nicolas TcherbakSales Director
01 69 19 49 49
Write e-mail