Our partner

Bilirubin light measurement system

ILT750 from International Light Technologies

The ILT750-Bili454 has been designed and calibrated to match the Ohmeda meter to within a few percent. The meter can be used not only on the blanket but on all of the GE lighting systems. It is an off the shelf replacement for people using any of the GE phototherapy blue light systems.

Features

Reads within a few percent of the discontinued Ohmeda meter
Large, easy-to-read OLED display
Verify irradiance and average irradiance values over the entire treatment area in less than 1 minute
Select units (μW/cm²/nm or W/cm²)
ISO17025 accredited and NIST traceable calibration
ISO13485 accredited, class I medical device
Detachable detector can be rotated for versatility or unmounted for safe, remote measurements

Further information

ILT750-BILI454 light meter - Replacement for the discontinued Ohmeda

The ILT750-BILI454 has been designed specifically to measure GE LED and traditional light sources. The detachable detector includes a 454 nm peak sensor, filter and cosine correcting input optic combination to ensure accurate blue light measurements on numerous blue light sources including:

GE Giraffe systems
GE Lullaby systems
GE BiliSoft systems
Traditional GE blue light systems

ILT750-Bili light meter

Versatile detector
The unique design of the ILT750 detector allows you to use it in any orientation. Use the meter with the detector head attached or detached, in the face up or face down orientation, always allowing you to see the screen while measuring. Detecor head cable is nearly one meter long, for easy reach into incubators.

Standard features

Dual units with broad sensitivity range:
0.08 to 8000 μW/cm²/nm,
3.0 to 300,000 μW/cm²
5-digit display resolution
Peak response at 470 nm to match bilirubin action spectrum
ISO17025 accredited and NIST traceable calibration
ISO13485 accredited, class 1 medical device
Cosine corrected sensor for accurate spatial response
Band Irradiance (μW/cm²/nm) or Irradiance (W/cm²)
Works with traditional sources as well as LED
Works on bili blankets, pads or overhead lamps
Simple to use device
Measures, calculates and provides irradiance data on a bili blanket in a matter of seconds
Easy to clean housing
Compact, easy-to-hold, ergonomic design
Uses AA batteries

Description
The ILT750 completely changes the way bili light sources are measured. Say goodbye to taking multi-point measurements and doing math. The ILT750 automatically calculates readings while you seamlessly run the detector over the blanket or under the lamp. The meter will automatically give you the Min/Max and average in a matter of seconds. No calculating or calculator required!

The ILT750 was designed with the OEM and distributor in mind. In addition to the standard features, customers can choose from an extensive list of customizable options including a custom label, start up/splash screen, custom measurement speed, digits of resolution, units of calibration, custom filtration, and more. Whether you’re looking to add a light meter to your bili treatment system, or upgrading the one you have, the ILT750 will set you apart with a simple-to-use, easy-to-clean, class 1 medical light meter.

ILT has been a leader in light measurement technology for over 55 years. We have partnered with OEM’s in many industries including medical, aerospace, industrial, manufacturing and more. The ILT750 light meter offers OEMS a fully branded, end-to-end, blue light measurement system, backed by a trusted partner in light measurement.