FTIR sample preparation: presses & dies

FTIR sample preparation: presses & dies - Apex XRF Quick Release dies
Apex XRF Quick Release dies

For the production of high quality sample pellets of 32 and 40  mm diameter. The patented auto-ejector sleeve allows release of the finished pellet without needing to reset the die in an inverted ...


FTIR sample preparation: presses & dies - Mini lab press
Mini lab press

The Mini Lab Press is an innovative and low-cost instrument for producing 7 mm KBr pellets. The press is designed as a table-top unit and operates hydraulically. The desired compressive load can be ...


FTIR sample preparation: presses & dies - Manual hydraulic press
Manual hydraulic press

Manual hydraulic presses for compressive loads of 15 t oder 25 t are compact laboratory presses and are ideally suited to the preparation of KBr discs or samples for X-ray fluorescence analysis. ...


FTIR sample preparation: presses & dies - 8 t/ 15 t/ 25 t power assisted hydraulic press
8 t/ 15 t/ 25 t power assisted hydraulic press

Atlas is a power assisted hydraulic press and is available in three version for compressive loads up to 8 t, 15 t and 25 t. The press is optimized for IR and XRF applications and can be used with all ...


FTIR sample preparation: presses & dies - Automated 8 t/15 t/25 t/40 t power assisted hydraulic press
Automated 8 t/15 t/25 t/40 t power assisted hydraulic press

Atlas Autotouch presses are fully programmable versions of the power assisted Atlas presses. They enable the controlled application and release of the desired load and maintain the load for a ...


FTIR sample preparation: presses & dies - Evacuable press dies
Evacuable press dies

We provide fully evacuable press dies from hardened stainless steel for producing high-quality pellets ranging from 5 mm up to 40 mm in diameter. These press dies are used in conjunction with ...


FTIR sample preparation: presses & dies - Lightweight press dies
Lightweight press dies

These light-weight press dies are made from 440C stainless steel and produce pellets with diameters of 32 mm (325410) and 40 mm (325411). They are particularly well suited for the preparation of solid ...


FTIR sample preparation: presses & dies - Evacuable integrated mini press and die system
Evacuable integrated mini press and die system

This evacuable integrated mini press and die system is designed to produce KBr pellets with a diameter of 8.5 mm. The sample is pressed between two screws with polished end surfaces. A hydraulic press ...


FTIR sample preparation: presses & dies - Sample grinding mill
Sample grinding mill

The grinding mill is designed to grind and mix samples for use in infrared spectroscopy. The sample is ground into uniform, fine particles in an agate or steel capsule by means of three balls. ...

Contact

Quantum Design GmbH

Im Tiefen See 58
64293 Darmstadt
Germany

Phone:+49 6151 8806-0
Fax:+49 6151 8806920
E-mail:germany@qd-europe.com
Cookie notice Cookies help us in providing our services. By using our services, you agree to the use of cookies. Privacy policy