Notre partenaire

Rhéomètre à cisaillement interfacial ISR Flip

KSV NIMA

Le système ISR Flip de KSV Nima permet la mesure de viscoélasticité interfaciale avec une sensibilité inégalé aux interfaces air-liquide et liquide-liquide.

Caractéristiques

Prédiction des mousses et émulsions et leurs stabilités
Suivie en temps réel des réactions aux interfaces
Détermination de la structure des couches minces
Suivie temps réel de l'adsorption des molécules aux interfaces
Examen des transitions de phase

Plus d'informations

Highly sensitive measurements
The lightweight magnetized probes enable highly sensitive measurement with minimum interaction between the instrument and the probe.

Full control of the probe
The magnetic trap keeps the probe positioned even through a long experiment or during procedures such as monolayer spreading. The strength of the trap can be precisely controlled by moving the trap closer or further away from the probe. This also enables wide moduli and frequency range for a single probe.

Expand your measurement possibilities
ISR Flip supports two camera positions to suit more purposes. Combining the instrument with a Langmuir trough allows the control of the monolayer packing density. The same trough can be used for both air-liquid and liquid-liquid measurements.

Applications controlled by interfacial rheology, including:

Biological systems such as pulmonary lung surfactant and meibum. Their functionality is largely based on their flow on interphases under stress.
Emulsions and foams whose stability is vital for their functionality. Viscoelasticity of the liquid-liquid interface can predict the stability of a colloidal system. Micelle/droplet fusion and fission are largely dependent on the interface viscoelasticity.
Food products, cosmetics, biophysics, pharmaceuticals, oil and gas, application areas where molecules at interfaces have a significant impact on the system performance.

Langmuir monolayer structural studies, including:

Phase changes, as the viscoelasticity of the layer is strongly affected by the microstructure of the monolayer.
Surface reactions such as crosslinking in real-time, as changes in molecular size and shape have typically a strong response in their rheological properties.
Aggregation and adsorption, as they typically change the viscoelasticity of the film.

Caractéristiques techniques

Measurements
Frequency range (Hz)	0.01 - 10
Dynamic moduli range (N/m)	2x10^-8 - 1
Dynamic moduli resolution (N/m)	1x10^-8
Strain range (%)	0.04 - 20^a
Instrument
Camera	USB 3.0 digital camera with zoom
Camera resolution	1980 x 1200
Field of view (Φ, mm)	4.7 mm x 2.93 mm / 0.73 mm x 0.45 mm
Instrument dimensions (LxWxH, mm	400 x 280 x 600
Weight (kg)	21
^a The strain range is dependent on the channel width. For low volume the range is 0.08 - 40

Model specification

	Langmuir Troughs
	ISR Flip High Compression	ISR Flip Low Volume
Surface area (cm²)	588	13.2
Trough top inner dimensions, lower phase (LxWxH, mm)	784 x 75 x 10	120 x 11 x 6.5
Trough top inner dimensions, upper phase, (LxWxH, mm)	784 x 95 x 7	120 x 19 x 6
Lower subphase volume (ml)	588	4.7
Upper subphase volume (ml)	521	13.9
Maximum compression ratio	7.8	N.A.
Barrier speed (mm/min)	0.1 - 270	0.1 - 270
Balance measuring range (mN/m)	0 - 300	0 - 150^b
Maximum balance load (g)	1	1
Balance resolution (μN/m)	0.03	0.04^b
Instrument dimensions (L x W x H, mm)	908 x 280 x 600	400 x 280 x 770
^b Pt-rod has to be used with the low volume cell