Specac

The Golden Gate Diamond ATR unit continues to set new standards in ATR Technology. Due to its hardness and chemical resistance, the solid Type IIa diamond, metal-bonded into a tungsten carbide mount, ...

Quest is a single reflection ATR unit from Specac for spectroscopy in the mid and far infrared spectral regions.

The Gateway ATR system comprises an optical basic unit and a broad range of sample holders for the analysis of liquids, pastes, gels, solid samples, powders, films, etc. The different samples are held ...

The Selector diffuse reflectance accessory enables solid samples to be analysed without the need for extensive sample preparation. The optimised off-axis configuration of the selector optics reduces ...

The pre-adjusted Specac Minidiff Plus Diffuse Reflectance Accessory is a low-cost alternative to the Selector diffuse reflectance accessory. The elimination of the need for adjustment, along with ...

The Mini Lab Press is an innovative and low-cost instrument for producing 7 mm KBr pellets. The press is designed as a table-top unit and operates hydraulically. The desired compressive load can be ...

Our robust manual hydraulic laboratory presses with 15 and 25 t load configurations are essential for producing KBr pellets and the preparation of XRF samples. They have been in the market for decades ...

Atlas is a power assisted hydraulic press and is available in three version for compressive loads up to 8 t, 15 t and 25 t. The press is optimized for IR and XRF applications and can be used with all ...

Atlas Autotouch presses are fully programmable versions of the power assisted Atlas presses. They enable the controlled application and release of the desired load and maintain the load for a ...

We provide evacuable pellet press dies made of hardened stainless steel for the preparation of high-quality pellets with diameters between 5 mm - 40 mm.  The press dies come with all necessary ...

These light-weight press dies are made from 440C stainless steel and produce pellets with diameters of 32 mm (325410) and 40 mm (325411). They are particularly well suited for the preparation of solid ...

This evacuable integrated mini press and die system is designed to produce KBr pellets with a diameter of 8.5 mm. The sample is pressed between two screws with polished end surfaces. A hydraulic press ...

The Specac Mini Film Maker Kit was developed specifically for producing thin films of polymer and plastic materials for infrared transmission analysis. The system enables quick and easy hot pressing ...

This film maker can only be used in conjunction with heated platens and a hydraulic press. The heated platens are mounted in the press and the film maker is positioned between the heated platens. ...

The high-temperature film maker for temperatures up to 400 °C is designed with integrated heated platens and cooling system. Only an additional hydraulic press is required. The complete film maker is ...

The electrically heated platens are mounted directly in the hydraulic press. The upper platen is attached to the lead screw of the press and moves up and down with the latter. The lower heated platen ...

The magnetic film holder offers an alternative method for fastening thin films. The film is held against the retaining plate by a magnetic ring.

Infrared polarizers are available for the spectral range from 1 μm to 1000 μm. These are grid polarizers with a range of substrates including KRS-5, germanium, CaF2 or ZnSe, on which an alumunium grid ...

The oil-in-water set is supplied complete with matched IR quartz transmission cells with path lengths of 10 mm (rectangular), 50 mm and 100 mm (cylindrical) along with a cell holder.

These high-pressure liquid cells are suitable for analysis of liquids at high pressure (max. 136 bar or 340 bar, depending on window material). The cell body is made from stainless steel, window ...

The variable temperature cell enables solid and liquid samples to be analysed for transmission over a temperature range from -190 °C up to 250 °C. Cooling of the cell is achieved by means of a cooling ...

The electric heating jacket is designed for transmission measurements on liquids and solids from RT to 250 °C. The heating jacket accomodates a liquid cell (static or flow) or a solid sample holder. ...

The high-pressure high-temperature cell enables IR spectroscopic analysis at temperatures up to 800 °C. The cell can be used at pressures from vacuum up to 66 bar and is also suited to the analysis of ...

Compression cells with diamond window are designed for analysis of micro solid samples for transmission. The sample to be analysed is placed between two diamond windows and compressed to the ideal ...

The 10 cm gas cell are designed for analysis of gaseous samples under standard temperature conditions.

The heatable gas cell allows the analysis of gaseous samples at temperatures from RT to 250 °C.

Long-path gas cells work according to the White principle, in which IR light is reflected several times within a three-mirror-system in order to increase the path length. The cells are available in ...

Specacard enable the convenient storage of KBr pellets and polymer films. Samples are placed between the open halves of the self-adhesive card and the card is folded. The front side provides space for ...

Many IR windows become dull and their surface scratched after an extended period of use. This kit contains all of the essential materials required to clean and re-polish windows to within a flatness ...

The Pearl is a liquid transmission accessory designed for laboratory spectroscopic analysis of liquid and viscous samples in the near and mid infrared,

Transmission spectroscopy is one of the basic techniques for IR analysis. The sample and wavelength to be analysed determine the choice of window material, path length and window arrangement. The Omni ...