LOT-QuantumDesign
Our partner Specac

High-temperature film maker for temperatures up to 400 °C

From Specac

The high-temperature film maker for temperatures up to 400 °C is designed with integrated heated platens and cooling system. Only an additional hydraulic press is required. The complete film maker is simply placed in the press.

Features
  • Heatable up to 400 °C
  • Maximum load 2 t
  • Film thicknesses of 0.015 mm, 0.025 mm, 0.05 mm, 0.1 mm, 0.25 mm and 0.5 mm
  • Film diameter 29 mm

Further information

Water inlet and outlet hoses of the cooling system are protected by non-return valves. This system operates at low voltage and is fitted with thermal cutout swiches. Special forceps enable the aluminium foil to be shaped into small troughs to retain the granulate. The finished film can then be placed in a magnetic film holder or in a Specacard for analysis. The maximum pressure for this film make is 2 t, satisfactory results can be achieved at pressures from around 1 t.

Downloads

Folienpresswerkzeuge

Contact

Dr. Joachim Weiss
Dr. Joachim Weiss

Related products

Laboratory presses with 15- and 25- ton loads
Our robust manual hydraulic laboratory presses with 15 and 25 t load configurations are essential for producing KBr pellets and the preparation of XRF samples. They have been in the market for decades ...
8 t/ 15 t/ 25 t power assisted hydraulic press
Atlas is a power assisted hydraulic press and is available in three version for compressive loads up to 8 t, 15 t and 25 t. The press is optimized for IR and XRF applications and can be used with all ...
Automated 8 t/15 t/25 t/40 t power assisted hydraulic press
Atlas Autotouch presses are fully programmable versions of the power assisted Atlas presses. They enable the controlled application and release of the desired load and maintain the load for a ...
Atlas constant thickness film maker up to 300 °C
This film maker can only be used in conjunction with heated platens and a hydraulic press. The heated platens are mounted in the press and the film maker is positioned between the heated platens. ...
Mini Film Maker Kit
The Specac Mini Film Maker Kit was developed specifically for producing thin films of polymer and plastic materials for infrared transmission analysis. The system enables quick and easy hot pressing ...
Film holders
The magnetic film holder offers an alternative method for fastening thin films. The film is held against the retaining plate by a magnetic ring.
Card mount for thin films
Specacard enable the convenient storage of KBr pellets and polymer films. Samples are placed between the open halves of the self-adhesive card and the card is folded. The front side provides space for ...
Why melt polymer films?
Today's plastics are multi-component systems of polymers, additives (such as plasticizers) and fillers. Composition monitoring is an important part of quality control. Since many of these components ...

Contact

Quantum Design GmbH

Breitwieserweg 9
64319 Pfungstadt
Germany

Phone:+49 6157 80710-0
Fax:+49 6157 807109
E-mail:germanyqd-europe.com
Dr. Joachim WeissProduct Manager - Spectroscopy & Marketing Manager - Content
+49 6157 80710-72
Write e-mail