LOT-QuantumDesign
Our partner AMI

Level Instrumentation

Sensors and controllers from American Magnetics
The sensors and controllers from American Magnetics (AMI) allows to monitor and control the level of liquids and interfaces liquid/liquid in a dewar. Unattended autofill systems for both laboratory and heavier-duty industrial applications are configurable. Features
  • Sensors for: conductive and non-conductive liquids, cryogens, viscous media, liquid/liquid interfaces, bulk solids, powders: He, N, Ne, Xe, O2, H, CO2, natural gas, Ar, GPL, butane, JP4, ethylene glycol, etc.
  • Safety and reliability: FM XP, I.S. & N.I. (C2x) certification
  • Linear, curved, flexible sensors
  • Various output options: Analog 0-10V Recorder output, Analog 4-20mA output, Digital RS-232, RS-422, or IEEE-488 (GPIB) output, LabView drivers are supplied with all digital output options
  • Full automation

Further information

Autofill systems
American Magnetic's extensive experience encompasses the unique requirements for accurately measuring and efficiently controlling cryogenic liquid levels, primarily (but not limited to) nitrogen in unattended auto-fill systems for both laboratory and heavier-duty industrial applications. Depending on the complexity, these systems incorporate either AMI’s Model 186 or Model 286 Liquid Level Controller and associated Liquid Level Sensors into a safe and reliable level control system. Dewar sizes range from "standard" 5 to 50 liters, to the less than 0.25 liter dewars used in IR/CCD detector systems. These are just a few of the many unattended auto-fill applications for systems that need uninterrupted LN2 temperature environments: Crystallography, CCD and HgCdTe Detectors X-ray and Gamma-ray spectroscopy systems, biological sample or single-crystal storage astronomy, fluorescence and chemiluminescence spectroscopy. Gravity-Feed
Gravity-feed systems are an AMI innovation applied in situations where the target dewar must be kept continuously full. In these applications, the source dewar is mounted above the target dewar and is the object of the autofill function.

Specification

pdf
IT-AMI-Model_188_Liquid-Solid_level.pdf
269.42 KB
Model 188 Liquid-solid level specifications
pdf
IT-AMI-Model_175_RF_Capacitance_Level_transmitter.pdf
3.03 MB
Model 175 RF capitance level transmitter specifications
pdf
IT-AMI-Cryogenic_Liquid_Auto-Fill_Systems.pdf
761.21 KB
Cryogenic liquid auto-fill systems specifications

Applications

Cryogenics
Aerospace
Stocking
Crystallography
CCD and HgCdTe detectors
X-ray and Gamma-ray spectro-scopy systems
Biological sample or single-crystal storage
Astronomy
Fluorescence and chemiluminescence spectroscopy

Downloads

Model 188 Liquid-solid level specifications
Model 175 RF capitance level transmitter specifications
Cryogenic liquid auto-fill systems specifications

Contact

Dr. Simone Paziani
Dr. Simone Paziani

Related products

Advanced technology helium liquefier
The Advanced Technology Liquefiers (ATLs) are a cryo-cooler based helium liquefier. The ATLs are lab-scale and mobile devices that allow you to recover and liquefy the helium gas currently being lost ...
Physical Property Measurements in a cryogen-free system (PPMS DynaCool)
The PPMS DynaCool is a completely redesigned instrument that provides all the capabilities of the Physical Property Measurement System without the need for any liquid cryogen. The system uses a ...
Physical Property Measurement System (PPMS)
The PPMS is an automated low-temperature and magnet system for the measurement of material properties like specific heat, magnetic AC and DC susceptibility and both electrical and thermal transport ...
Standard near infrared camera
Xeva is a high performance near infrared camera. The camera is equipped with a thermoelectric cooler for long term stable images.
MPMS3 SQUID magnetometer
The MPMS3 (formerly MPMS SQUID VSM) is providing users with the sensitivity of a SQUID (Superconducting Quantum Interference Device) and the choice of multiple measurement modes. 
CCD cameras with shutter
Our CCD camera section offers high-end cameras for demanding scientific applications. Front and back illuminated CCD sensors with optimized anti-reflection coatings convert more than 90% of the ...
Cameras for fiber-coupled scintillators
For harder high-energy photons or particles from about 10 keV to 100 keV, cameras with indirect detection methods are preferred. Indirect detection employs scintillators and phosphor screens to ...
CCD cameras for direct detection
Besides their standard use as imaging devices CCD sensors are also suitable for the direct detection of VUV, EUV light and soft X-rays. For this purpose we offer back illuminated CCD sensors without ...
Cryogenic Probe Station with actively cooled tips
The cryogenic probe station Model 122 Kilimanjaro provides a low temperature platform with a closed helium cycle for device probing.  Common probe stations use manipulator arms fixed at room ...

Contact

Quantum Design s.r.l.

Via Francesco Sapori, 27
00143 Roma
Italy

Phone:+39 06 5004204
Fax:+39 06 5010389
E-mail:italy@qd-europe.com
Simone PazianiProduct Manager
+39 06 5004204
paziani@qd-europe.com