MicroWriter laser lithography system

MicroWriter is a flexible photolithography machine designed for rapid prototyping and small-volume manufacturing in R&D laboratories and small clean rooms. Conventional approaches to photolithography are usually based on exposing through a chromium-glass mask manufactured by specialist vendors. The fact that all of the wafer is exposed in parallel makes this technique fast. The alternative conventional approach is to use direct-write laser lithography, where a computer-controlled laser writes directly to the wafer. The optics required to make a direct-write machine expose quickly are extremely complicated and result either in the machine being very expensive (~€1M) or very slow (~18 hours exposure time for a single wafer).
The low-cost MicroWriter combines the flexibility of maskless direct writing with the speed of parallel exposure.

More about the laser lithography system MicroWriter

Contact

Dr. Simone Paziani
Dr. Simone Paziani

Register

Newsletter registration

Contact

Quantum Design s.r.l.

Via Francesco Sapori, 27
00143 Roma
Italy

Phone:+39 06 5004204
Fax:+39 06 5010389
E-mail:italy@qd-europe.com
Dr. Simone PazianiSales Director
+39 06 5004204
Write e-mail