FTIR sample preparation: presses & dies

FTIR sample preparation: presses & dies - Good to know about KBr pellets
Good to know about KBr pellets

KBr pellet formation is a classic technique for the analysis of solids that retains attractive features over newer techniques such as ATR. The ability to change the pathlength of the compound of ...


FTIR sample preparation: presses & dies - Mini lab press
Mini lab press

The Mini Lab Press is an innovative and low-cost instrument for producing 7 mm KBr pellets. The press is designed as a table-top unit and operates hydraulically. The desired compressive load can be ...


FTIR sample preparation: presses & dies - Laboratory presses with 15- and 25- ton loads
Laboratory presses with 15- and 25- ton loads

Our robust manual hydraulic laboratory presses with 15 and 25 t load configurations are essential for producing KBr pellets and the preparation of XRF samples. They have been in the market for decades ...


FTIR sample preparation: presses & dies - 8 t/ 15 t/ 25 t power assisted hydraulic press
8 t/ 15 t/ 25 t power assisted hydraulic press

Atlas is a power assisted hydraulic press and is available in three version for compressive loads up to 8 t, 15 t and 25 t. The press is optimized for IR and XRF applications and can be used with all ...


FTIR sample preparation: presses & dies - Automated 8 t/15 t/25 t/40 t power assisted hydraulic press
Automated 8 t/15 t/25 t/40 t power assisted hydraulic press

Atlas Autotouch presses are fully programmable versions of the power assisted Atlas presses. They enable the controlled application and release of the desired load and maintain the load for a ...


FTIR sample preparation: presses & dies - Press dies for producing KBr pellets and for x-ray spectroscopy sample preparation
Press dies for producing KBr pellets and for x-ray spectroscopy sample preparation

We provide evacuable pellet press dies made of hardened stainless steel for the preparation of high-quality pellets with diameters between 5 mm - 40 mm.  The press dies come with all necessary ...


FTIR sample preparation: presses & dies - Lightweight press dies
Lightweight press dies

These light-weight press dies are made from 440C stainless steel and produce pellets with diameters of 32 mm (325410) and 40 mm (325411). They are particularly well suited for the preparation of solid ...


FTIR sample preparation: presses & dies - Evacuable integrated mini press and die system
Evacuable integrated mini press and die system

This evacuable integrated mini press and die system is designed to produce KBr pellets with a diameter of 8.5 mm. The sample is pressed between two screws with polished end surfaces. A hydraulic press ...

Contact

Quantum Design GmbH

Breitwieserweg 9
64319 Pfungstadt
Germany

Phone:+49 6157 80710-0
Fax:+49 6157 807109
E-mail:germanyqd-europe.com