Our partner
Atlas constant thickness film maker up to 300 °C
From SpecacThis film maker can only be used in conjunction with heated platens and a hydraulic press. The heated platens are mounted in the press and the film maker is positioned between the heated platens. After pressing, the complete film maker is briefly placed in a cooling mould (water cooling). The finished film can then be removed and placed in a magnetic film holder or Specacards for analysis in an IR spectrometer. The maximum pressure for this film maker is 4 t, satisfactory results can however be achieved at pressures from around 1 t.
- Can be used at temperatures up to 300 °C in conjunction with electric heated platens (315515)
- Maximum load 4 t
- Film thicknesses of 0.015 mm, 0.025 mm, 0.05 mm, 0.1 mm, 0.25 mm and 0.5 mm
- Film diameter 29 mm
Downloads
Contact
Dr.
Joachim
Weiss
Product Manager - Spectroscopy & Marketing Manager - Content
| +49 6157 80710-72 | |
| +49 6157 80710972 | |
| Write e-mail |
Dr.
Joachim
Weiss
The electrically heated platens are mounted directly in the hydraulic press. The upper platen is attached to the lead screw of the press and moves up and down with the latter. The lower heated platen ...
Our robust manual hydraulic laboratory presses with 15 and 25 t load configurations are essential for producing KBr pellets and the preparation of XRF samples. They have been in the market for decades ...
Atlas is a power assisted hydraulic press and is available in three version for compressive loads up to 8 t, 15 t and 25 t. The press is optimized for IR and XRF applications and can be used with all ...
Atlas Autotouch presses are fully programmable versions of the power assisted Atlas presses. They enable the controlled application and release of the desired load and maintain the load for a ...
The high-temperature film maker for temperatures up to 400 °C is designed with integrated heated platens and cooling system. Only an additional hydraulic press is required. The complete film maker is ...
The Specac Mini Film Maker Kit was developed specifically for producing thin films of polymer and plastic materials for infrared transmission analysis. The system enables quick and easy hot pressing ...
The magnetic film holder offers an alternative method for fastening thin films. The film is held against the retaining plate by a magnetic ring.
Specacard enable the convenient storage of KBr pellets and polymer films. Samples are placed between the open halves of the self-adhesive card and the card is folded. The front side provides space for ...
Today's plastics are multi-component systems of polymers, additives (such as plasticizers) and fillers. Composition monitoring is an important part of quality control. Since many of these components ...
Navigation
Categories
Contact
Quantum Design GmbH
Breitwieserweg 9
64319 Pfungstadt
Germany
| Phone: | +49 6157 80710-0 |
| Fax: | +49 6157 807109 |
| E-mail: | germanyqd-europe.com |
